REMOVAL

WARNING: Refer to the applicable warnings and cautions for this system before performing the following operation (refer to 24 - HEATING & AIR CONDITIONING/PLUMBING - FRONT - WARNING) and (refer to 24 - HEATING & AIR CONDITIONING/PLUMBING - FRONT - CAUTION). Failure to follow the warnings and cautions could result in possible personal injury or death.

NOTE: The rear HVAC housing must be removed from the vehicle for service of the mode door actuator, blend door actuator, blower motor and blower motor resistor and, it must be disassembled for service of the A/C evaporator, heater core, mode-air door and blend-air door.



NOTE: Illustration shown with rear body cradle removed for clarity.



(refer to 24 - HEATING & AIR CONDITIONING/PLUMBING - FRONT - STANDARD PROCEDURE - REFRIGERANT SYSTEM RECOVERY)
(refer to 7 - COOLING - STANDARD PROCEDURE - COOLING SYSTEM DRAIN)








(refer to 23 - BODY/INTERIOR/TRIM-QUARTER PANEL - REMOVAL)