B2318-WIPER HI/LOW CONTROL CIRCUIT HIGH
For a complete wiring diagram Refer to Section 8W.
- When Monitored:
- With the ignition on.
- Set Condition:
- When the FCM detects a short/HIGH condition.
| Possible Causes |
| INTEGRATED POWER MODULE |
Diagnostic Test
1.INTEGRATED POWER MODULEDoes the Scan Tool read: B2318-WIPER HI/LOW CONTROL CIRCUIT HIGH?
Yes
- Replace the Integrated Power Module in accordance with the service information.
- Perform the BODY VERIFICATION TEST — VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)
No
- Test complete.
- Perform the BODY VERIFICATION TEST — VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)