B223C-INTRUSION TRANSCEIVER MODULE INTERNAL

When Monitored: Ignition on.
Set Condition: Internal Intrusion Transceiver Module test failed.

For a complete wiring diagram Refer to Section 8W.

Possible Causes

INTRUSION TRANSCEIVER MODULE

1.DETERMINING IF DTC IS CURRENT

Does the DTC reset?

Yes

Replace the Intrusion Transceiver Module in accordance with the Service Information.
Perform BODY VERIFICATION TEST – VER 1 (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)

DTC is not active at this time. Test complete.
Perform BODY VERIFICATION TEST – VER 1 (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)