B2215-FRONT CONTROL MODULE INTERNAL

For a complete wiring diagram Refer to Section 8W.


  • When Monitored:

    Continuously.

  • Set Condition:

    The Front Control Module detects an internal fault.


Possible Causes
 
FRONT CONTROL MODULE
 




Diagnostic Test

1.REPLACE THE FRONT CONTROL MODULE IF DTC IS ACTIVE



Does the scan tool display this DTC as active?

Yes


No
  • If the DTC is stored, check for an intermittent condition. Visually inspect the related wiring harness connectors. Look for broken, bent, pushed out, or corroded terminals.