C1240-STEERING ANGLE SENSOR ANGLE OVERTRAVEL PERFORMANCE

For a complete wiring diagram Refer to Section 8W.


  • When Monitored:

    Continuously.

  • Set Condition:

    The Steering Column Module (SCM) has detected that the Steering Angle Sensor travel (rotation) has exceeded 900 degrees.


Possible Causes
  
INTERMITTENT STEERING ANGLE SENSOR ANGLE OVERTRAVEL PERFORMANCE DTC
  
STEERING OR FRONT SUSPENSION COMPONENT DAMAGE
  
STEERING COLUMN MODULE (SCM)
  



Diagnostic Test

1.DTC IS ACTIVE

NOTE: If B210D–BATTERY VOLTAGE LOW or B210E–BATTERY VOLTAGE HIGH is set along with this DTC, diagnose the battery voltage DTC first.






Is the DTC status Active at this time?

Yes
  • Go to 2


No
  • Go to 4

2.STEERING OR FRONT SUSPENSION COMPONENT DAMAGE



Were any problems found?

Yes
  • Repair or replace front suspension or steering components as necessary in accordance with the Service Information.


No
  • Go To 3

3.STEERING COLUMN MODULE (SCM)





Repair
  • Replace the Steering Column Module (SCM) in accordance with the Service Information.

4.INTERMITTENT STEERING ANGLE SENSOR ANGLE OVERTRAVEL PERFORMANCE DTC






Were any problems found?

Yes
  • Repair as necessary.


No
  • Test complete.