TRANSFER CASE VERIFICATION TEST VER 1

Diagnostic Test

NOTE: To select or deselect 4LO (if equipped), vehicle speed must be below 3 M.P.H. (5 KM/H) with the ignition ON and the transmission in neutral (auto trans).

NOTE: To select or deselect Transfer Case Neutral, vehicle speed must be 0 M.P.H. with the ignition ON, engine OFF, the brake pedal applied, and the transmission in neutral (auto trans). Press the Neutral button (if equipped) on the Transfer Case Selector Switch until the Neutral Indicator is illuminated solidly and the cluster displays '4WD System in Neutral'.

WARNING: Apply the parking brake. The vehicle may roll with the Transfer Case in neutral.

NOTE: To verify that the Transfer Case is in Neutral, shift the automatic transmission into reverse and release the brake pedal for three seconds. There should be no vehicle movement if the Transfer Case is in Neutral.

• Return to the symptom list and perform the appropriate diagnostic test.

• Repair is complete.