3.0L DIESEL

CAUTION: Constant tension hose clamps are used on most cooling systems hoses. Use only the tools that are designed for this type of service. A number or letter is stamped on the clamp. If replacement is required, use only an original equipment clamp with the matching number or letter.

NOTE: Care must be taken when installing the radiator not to damage the fins of the radiator or other ancillary components. Note the location and proper installation of the radiator to charge air cooler and radiator to body rubber air seals. These must be installed correctly to prevent engine over heating and provide proper A/C efficiency.

NOTE: When ever the pressure line fittings are installed at the hydraulic fan drive, the O-rings must be replaced.

NOTE: Do Not waste usable coolant. If the solution is clean and the mixture is correct, reuse original coolant.

WARNING: Use extreme caution when engine is operating. Do not stand in direct line with the fan. Do not put your hands near pulleys, belts or fan. Do not wear loose clothes.