NAG1 TRANSMISSION VERIFICATION TEST
To validate that the repair(s) fixed the vehicle, perform the following steps.
CAUTION: Apply the parking brake.
NOTE: The Transmission Temperature can only be read while in Reverse or Drive.
(Refer to 21 - TRANSMISSION/TRANSAXLE/AUTOMATIC - NAG1/FILTER - STANDARD PROCEDURE)
(Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES/TRANSMISSION CONTROL MODULE - STANDARD PROCEDURE)
Road Test Procedure.
ROAD TEST PROCEDURE
Did any DTCs set?
Yes
- Refer to the identified category and perform the appropriate symptom(s).
No
- Testing is complete.