U1414-IMPLAUSIBLE/MISSING ECU CONFIGURATION DATA

For a complete wiring diagram Refer to Section 8W.


  • When Monitored:

    With the ignition on. The ORC on board diagnostics continuously monitors the CAN Bus message from the FCM containing the ORC Configuration Data.

  • Set Condition:

    This DTC will set if the appropriate CAN Bus message is not received by the ORC.


Possible Causes
  
FRONT CONTROL MODULE
  



Diagnostic Test

1. FRONT CONTROL MODULE FAILURE




Does the scan tool display any Front Control Module DTCs?

Yes
  • Select appropriate symptom from Symptom List. Repair all FCM active DTCs and before diagnosing the ORC DTCs.


No
  • Replace the Front Control Module in accordance with the Service Information.
  • Perform the *ORC VERIFICATION TEST-VER. 1