ABS-INTERMITTENT CONDITION TEST

For a complete wiring diagram Refer to Section 8W.

Diagnostic Test

NOTE: The Sensor Cluster is the same as the Dynamics sensor.

NOTE: The conditions that set the DTC are not present at this time. The following list may help in identifying the intermittent condition.

WARNING: When the engine is operating, do not stand in direct line with the fan. Do not put your hands near the pulleys, belts, or fan. Do not wear loose clothing. Failure to follow these instructions can result in personal injury or death.

Were any problems found during the above inspections?

Yes

Perform the necessary repairs.
Perform ABS VERIFICATION TEST. (Refer to 5 - BRAKES - STANDARD PROCEDURE).

Test Complete.