B1D62–POWER SEAT SWITCH STUCK
For a complete wiring diagram Refer to Section 8W.
- When Monitored:
Continuously.
- Set Condition:
When the Memory Seat Module detects the switch engaged in an active position for over 50 seconds, this code will set.
| Possible Causes |
| DRIVER SEAT SWITCH |
Diagnostic Test
1.TEST FOR INTERMITTENT CONDITIONDoes the scan tool display B1D62–POWER SEAT SWITCH STUCK?
Yes
- Replace the Driver Seat Switch as necessary.
- Perform POWER SEAT SYSTEM VERIFICATION TEST - VER 1.
No
- The conditions that caused this code to set are not present at this time. Using the wiring diagram/schematic as a guide, inspect the wiring and connectors.
- Perform POWER SEAT SYSTEM VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/POWER SEATS - DIAGNOSIS AND TESTING)