B1A3A–SECURITY RECEIVER SENSOR CIRCUIT LOW





For a complete wiring diagram Refer to Section 8W.


  • When Monitored:

    When the VTSS is armed.

  • Set Condition:

    If the current flow on the sensor signal circuit is above a specified range this DTC will set.


Possible Causes
 
(G460) INTRUSION RECEIVER SENSOR SIGNAL CIRCUIT SHORTED TO GROUND
 
INTRUSION SENSOR RECEIVER
 
INTRUSION TRANSCEIVER MODULE
 




Diagnostic Test

1.TEST FOR INTERMITTENT CONDITION








Does the scan tool display B1A3A–SECURITY RECEIVER SENSOR CIRCUIT LOW ?

Yes
  • Go To 2


No

2.INTRUSION SENSOR RECEIVER











Does the scan tool display B1A44–SECURITY RECEIVER SENSOR CIRCUIT OPEN?

Yes


No
  • Go To 3

3.CHECK THE (G460) INTRUSION RECEIVER SENSOR SIGNAL CIRCUIT SHORT TO GROUND







Is the resistance below 5.0 ohms?

Yes


No