B213C-IGNITION RUN (REMOTE START) CONTROL CIRCUIT HIGH

For a complete wiring diagram Refer to Section 8W.


  • When Monitored:

    With the ignition on.

  • Set Condition:

    The Front Control Module is not configured correctly setting a false DTC that does not apply to this vehicle.


Possible Causes
  
FRONT CONTROL MODULE NOT CONFIGURED CORRECTLY
  



Diagnostic Test

1.CHECK FOR ACTIVE DTC AND DETERMINE FCM CONFIGURATION





Does the scan tool display this DTC as active?

Yes
  • With the scan tool enter program network configuration and program the FCM to the vehicle configuration, erase DTC's and retest.


No
  • If the DTC is stored, check for an intermittent condition. Visually inspect the related wiring harness connectors. Look for broken, bent, pushed out, or corroded terminals. Erase the stored DTCs.