ASSEMBLY

NOTE: Soak new clutch friction plates in transfer case fluid for 20 minutes prior to installation.



CAUTION: When installing the clutch pressure plate, make sure that the wave spring remains piloted on the underside of the plate. Check that the spring does not protrude between the plate and the mainshaft.



NOTE: The clutch pressure plate must be engaged with the inner drum and held down when installing the retaining ring.



Do not use excessive amount of sealer as excess will be displaced into case interior and potentially clog the oil pump screen.


NOTE: Pull up on the main shaft when installing the retaining ring to ensure that the ring is fully engaged into the groove.

Lubricate the oil pump components with transmission fluid before installation.











