INSTALLATION - ENGINE
(Refer to 14 - FUEL SYSTEM/FUEL DELIVERY/QUICK CONNECT FITTING - STANDARD PROCEDURE)
- Intake Air Temperature (IAT) Sensor (4)
- Idle Air Control (IAC) Motor (3)
- Fuel Injectors
- Throttle Position (TPS) Switch (2)
- Engine Oil Pressure Switch
- Engine Coolant Temperature (ECT) Sensor
- Manifold Absolute Pressure (MAP) Sensor
- Camshaft Position (CMP) Sensor
- Coil Over Plugs
(Refer to 8 - ELECTRICAL/CHARGING/GENERATOR - INSTALLATION)
(Refer to 24 - HEATING & AIR CONDITIONING/PLUMBING/A/C CONDENSER - INSTALLATION) (Refer to 7 - COOLING/ENGINE/RADIATOR - INSTALLATION)
(Refer to 7 - COOLING/ACCESSORY DRIVE/DRIVE BELTS - INSTALLATION) (Refer to 7 - COOLING/ENGINE/FAN DRIVE VISCOUS CLUTCH - INSTALLATION)
(Refer to 24 - HEATING & AIR CONDITIONING/PLUMBING/A/C COMPRESSOR - INSTALLATION)
(Refer to 8 - ELECTRICAL/STARTING/STARTER MOTOR - INSTALLATION)
CAUTION: The structural cover requires a specific torque sequence. Failure to follow this sequence may cause severe damage to the cover.
(Refer to 9 - ENGINE/ENGINE BLOCK/STRUCTURAL COVER - INSTALLATION)
(Refer to 24 - HEATING & AIR CONDITIONING/PLUMBING/REFRIGERANT - STANDARD PROCEDURE)
(Refer to 7 - COOLING - STANDARD PROCEDURE)