REMOVAL





(Refer to 7 - COOLING - STANDARD PROCEDURE)

(Refer to 7 - COOLING/ENGINE/RADIATOR FAN - REMOVAL)



(Refer to 9 - ENGINE/ENGINE BLOCK/VIBRATION DAMPER - REMOVAL)
(Refer to 8 - ELECTRICAL/CHARGING/GENERATOR - REMOVAL)
(Refer to 24 - HEATING & AIR CONDITIONING/PLUMBING/A/C COMPRESSOR - REMOVAL)

CAUTION: The 3.7L engine uses an anerobic sealer instead of a gasket to seal the front cover to the engine block, from the factory. For service, Mopar® Grey Engine RTV sealant must be substituted.

NOTE: It is not necessary to remove the water pump for timing cover removal.