INSTALLATION - ENGINE

CAUTION: The structural cover requires a specific torque sequence. Failure to follow this sequence may cause severe damage to the cover.

NOTE: New clamps must be used on exhaust manifold flanges. Failure to use new clamps may result in exhaust leaks.

• Intake air temperature (IAT) sensor (4)
• Fuel Injectors
• Throttle Position (TPS) Switch (2)
• Idle Air Control (IAC) Motor (3)
• Engine Oil Pressure Switch
• Engine Coolant Temperature (ECT) Sensor
• Manifold Absolute Pressure MAP) Sensor
• Camshaft Position (CMP) Sensor
• Coil Over Plugs
• Crankshaft Position Sensor