P1697–EMR (SRI) MILEAGE NOT STORED

When Monitored: Ignition on and battery voltage greater than 10 volts.
Set Condition: The SRI Mileage has not been programmed into the PCM.

For a complete wiring diagram Refer to Section 8W.

Possible Causes

SRI MILEAGE NOT PROGRAMMED INTO THE PCM

POWERTRAIN CONTROL MODULE (PCM)

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. (Refer to 9 - ENGINE - STANDARD PROCEDURE).

1.SRI MILEAGE NOT PROGRAMMED INTO THE PCM

Is the status Active for this DTC?

Yes

Replace and program the Powertrain Control Module in accordance with the Service Information.
Perform the PCM Verification Test Ver. 1 (Refer to 9 - ENGINE - STANDARD PROCEDURE).

The SRI mileage has been successfully programmed into the PCM. Test is complete.
Perform the PCM Verification Test Ver. 1 (Refer to 9 - ENGINE - STANDARD PROCEDURE).