P0643-SENSOR REFERENCE VOLTAGE 1 CIRCUIT HIGH





For a complete wiring diagram Refer to Section 8W


  • When Monitored:

    With the ignition on.

  • Set Condition:

    The PCM detects a short to voltage on the 5 volt supply circuit.


Possible Causes
 
INTERMITTENT DTC
 
(K855) 5 VOLT SUPPLY CIRCUIT SHORTED TO VOLTAGE
 
(K856) 5 VOLT SUPPLY CIRCUIT SHORTED TO VOLTAGE
 
POWERTRAIN CONTROL MODULE (PCM)
 


Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. (Refer to 9 - ENGINE - STANDARD PROCEDURE)



Diagnostic Test

1.DTC IS ACTIVE


WARNING: When the engine is operating, do not stand in direct line with the fan. Do not put your hands near the pulleys, belts, or fan. Do not wear loose clothing. Failure to follow these instructions can result in personal injury or death.




Is the status Active for this DTC?

Yes
  • Go to2


No

2.(K856) 5 VOLT SUPPLY CIRCUIT SHORTED TO VOLTAGE






Is there any voltage present?

Yes


No
  • Go to3

3.(K855) 5 VOLT SUPPLY CIRCUIT SHORTED TO VOLTAGE






Is there any voltage present?

Yes


No
  • Go to4

4.POWERTRAIN CONTROL MODULE (PCM)











Were any problems found?

Yes


No