ENGINE
Component
|
Fluids, Lubricants and Genuine Parts
|
Engine Coolant
|
Mopar® Antifreeze/Coolant 5 Year/100,000 Mile (5 Year/161,000 km) Formula HOAT (Hybrid Organic Additive Technology) or equivalent.
|
Engine Oil
|
Use API Certified SAE 5W-20 Engine Oil. Refer to your engine oil filler cap for correct SAE grade meeting DaimlerChrysler Material Standard MS-6395.
|
Engine Oil Filter
|
Mopar® 04884900AB or equivalent.
|
Fuel Selection
|
87 Octane (R + M)/2
DO NOT use gasoline containing Methanol or E85 Ethanol. Use of these blends may result in starting and driveability problems and may
damage critical fuel system components. Problems that result from using methanol/gasoline or E85 Ethanol blends are not the responsibility of the manufacturer. While MTBE is an oxygenate made from Methanol,
it does not have the negative effects of Methanol.
|
ENGINE - EXPORT
Component
|
Fluids, Lubricants and Genuine Parts
|
Engine Coolant — Gasoline Engines
|
Mopar® Antifreeze/Coolant 5 Year/100,000 Mile (5 Year/161,000 km) Formula HOAT (Hybrid Organic Additive Technology) or equivalent.
|
Engine Coolant — Diesel Engine
|
Glysantin G 30-91.
|
Engine Oil - Gasoline (Non ACEA Categories)
|
For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends engine oils that are API certified and meet the
requirements of DaimlerChrysler Material Standard MS-6395. Use Mopar® or an equivalent oil meeting the specification MS-6395. These Certified Oils exhibit the American Petroleum Institute (API) Engine
Oil Certification Symbol on the front of the oil container. This symbol means that the oil has been tested, certified and licensed by the American Petroleum Institute (API) to meet the oil standards required
by the manufacturers.
|
Engine Oil - Gasoline (ACEA Categories)
|
For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils that meet the requirements of ACEA A1/B1, A2/B2 or A3/B3.
|
Engine Oil - Diesel
|
Use only Synthetic Diesel engine oils conforming to the most current version of ACEA A3/B4 or A3/B4/C3.
|
Engine Oil Filter — Gasoline Engines
|
Mopar® 04884900AB or equivalent.
|
Engine Oil Filter — Diesel Engine
|
Mopar® 04884700AA
|
Spark Plugs
|
Refer to the Vehicle Emission Control Information label in the engine compartment.
|
Fuel Selection — Gasoline Engines
|
91 Research Octane Number (RON)
|
Fuel Selection — Diesel Engines
|
European low sulfur diesel. Cetane: 50 minimum, Sulfur 50 ppm maximum. (intermittent use of up to 350 ppm sulfur fuel can be tolerated, but emissions performance will degrade)
|
CHASSIS
Component
|
Fluids, Lubricants and Genuine Parts.
|
Automatic Transaxle Fluid
|
Mopar® CVTF+4
|
Manual Transaxle Fluid
|
Mopar® ATF+4 MS9602
|
Rear Drive Assembly (RDA)
|
Mopar® Gear & Axle Lubricant SAE 80W-90 API GL 5 or equivalent non-synthetic product.
|
Power Transfer Unit (PTU)
|
Mopar® Gear & Axle Lubricant SAE 80W-90 API GL 5 or equivalent non-synthetic product.
|
Brake Master Cylinder
|
Mopar® DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids or equivalent.
|
Power Steering Reservoir
|
Mopar ® Power Steering Fluid+4 or Mopar® ATF+4 Automatic Transmission Fluid.
|
CAPACITIES
DESCRIPTION
|
U.S.
|
Metric
|
Fuel (Approximate)
|
13.5 Gallons
|
51.0 Liters
|
Engine Oil-With Filter
|
|
|
All Gasoline Engines (Use API Certified SAE 5W-20 Engine Oil.)
|
4.5 Quarts
|
4.26 Liters
|
Cooling System *
|
|
|
Mopar® Antifreeze/Coolant 5 Year/100,000 Miles (5 Year/161,000 km) Formula, or equivalent.
|
7.2 Quarts
|
6.8 Liters
|
Automatic Transaxle - Estimated Service Fill
|
4.0 Quarts
|
3.8 Liters
|
Automatic Transaxle - Overhaul Fill Capacity with Torque Converter Empty
|
8.6 Quarts
|
8.1 Liters
|
Power Transfer Unit - (PTU)
|
1.1 Pints
|
540ml
|
Rear Drive Assembly - (RDA)
|
1.1 Pints
|
540ml
|
Manual Transaxle - NV T355
|
2.5 - 2.8 Quarts
|
2.4 - 2.7 Liters
|
* Includes heater and coolant recovery bottle filled to MAX level.
|
CAPACITIES - EXPORT
DESCRIPTION
|
U.S.
|
Metric
|
Fuel (Approximate)
|
13.5 Gallons
|
51.0 Liters
|
Engine Oil-With Filter
|
|
|
All Gasoline Engines (Use ACEA A1/B1, A3/B4 or A3/B3; SAE 5W-20 Engine Oil.)
|
4.5 Quarts
|
4.26 Liters
|
Diesel Engine (Use Synthetic ACEA A3/B4 or A3/B4/C3; SAE 5W-30, SAE 0W-40, SAE 5W-40, SAE 10W-40, or SAE 15W-40 Engine oil.)
|
4.2 Quarts
|
4.0 Liters
|
Cooling System *
|
|
|
All Gasoline Engines use Mopar® Antifreeze/Coolant 5 Year/100,000 Miles (5 Year/161,000 km) Formula, or equivalent.
|
7.2 Quarts
|
6.8 Liters
|
Power Transfer Unit - (PTU)
|
1.1 Pints
|
540ml
|
Rear Drive Assembly - (RDA)
|
1.1 Pints
|
540ml
|
Manual Transaxle - BG6
|
2.1 Quarts
|
2.0 Liters
|
All Diesel Engines use Glysantin G 30-91 coolant.
|
8.5 Quarts
|
8.0 Liters
|
* Includes heater and coolant recovery bottle filled to MAX level.
|