C146B–AWD SWITCH STUCK





For a complete wiring diagram Refer to Section 8W


  • When Monitored:

    With the ignition on and no system undervoltage or overvoltage condition present.

  • Set Condition:

    Valid voltage for Transfer Case Selector switch active present for a calibratable time.


Possible Causes
 
TRANSFER CASE SELECTOR SWITCH
 
INSTRUMENT CLUSTER (CCN)
 




Diagnostic Test

1.C146B DTC IS ACTIVE

NOTE: If any other DTCs are present they must be repaired before continuing.





Is the status Active for this DTC?

Yes
  • Go to 2


No
  • Go to 3

2.TRANSFER CASE SELECTOR SWITCH














Does the voltage display as described?

Yes


No

3.INTERMITTENT WIRING AND CONNECTORS






Were any problems found?

Yes


No
  • Test complete.