REMOVAL

NOTE: Before proceeding, review all Warnings and Cautions. (Refer to 2 - SUSPENSION/FRONT - WARNING)


(Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE)







(Refer to 5 - BRAKES/HYDRAULIC/MECHANICAL/ROTOR - REMOVAL)















CAUTION: The strut assembly-to-knuckle attaching bolts (5) are serrated and must not be turned during removal. Proper removal is required. Refer to the following steps for the correct method.





CAUTION: Use care when separating the ball joint stud (4) from the knuckle (1), so the ball joint seal does not get cut.




NOTE: Do not allow the half shaft (1) to hang by the inner C/V joint; it must be supported to keep the joint from separating during this operation.