STANDARD PROCEDURE - TRANSMISSION CONTROL MODULE INITIALIZATION

NOTE: Refer to the following table when the Transmission Control Module (TCM) and/or transaxle has been replaced to determine if the TCM memory must be erased.

INITIAL LEARN (BRAND-NEW MODULE, MEMORY ALREADY CLEAR)

Battery must be connected. If the Totally Integrated Power Module (TIPM) is to be configured, configure the TIPM and then turn ignition key to OFF/LOCKED briefly, then back to RUN. The shifter must be in PARK or NEUTRAL, engine not running.

RELEARN, AFTER REPLACING A TRANSAXLE