P0072-AMBIENT AIR TEMPERATURE SIGNAL VOLTAGE TOO LOW





For a complete wiring diagram Refer to Section 8W


  • When Monitored:

    With the ignition on.

  • Set Condition:

    The Ambient Air Temperature Sensor signal is below 0.20 volts.


Possible Causes
 
(G31) AMBIENT AIR TEMP SENSOR SIGNAL CIRCUIT SHORTED TO GROUND
 
(G31) AMBIENT AIR TEMP SENSOR SIGNAL CIRCUIT SHORTED TO (G931) SENSOR GROUND
 
AMBIENT AIR TEMPERATURE SENSOR
 
TOTALLY INTEGRATED POWER MODULE
 




Diagnostic Test

1.CHECK FOR ACTIVE DTC

NOTE: If the ECM detects and stores a DTC, the ECM also stores the engine/vehicle operating conditions under which the DTC was set. Some of these conditions are displayed on the scan tool at the same time the DTC is displayed.


NOTE: Before erasing stored DTCs, record these conditions. Attempting to duplicate these conditions may assist when checking for an active DTC.






Did this DTC set again?

Yes
  • Go To2


No

2.AMBIENT AIR TEMPERATURE SENSOR






Does the scan tool display P0073 AMB AIR TEMP SENSOR SIGNAL VOLTAGE TOO HIGH?

Yes


No
  • Go To3

3.(G31) AMBIENT AIR TEMP SENSOR SIGNAL CIRCUIT SHORTED TO GROUND







Is the resistance above 1000 ohms?

Yes
  • Go To4


No

4.(G31) AMBIENT AIR TEMP SENSOR SIGNAL CIRCUIT SHORTED TO (G931) SENSOR GROUND






Is the resistance above 1000 ohms?

Yes


No