REMOVAL

WARNING: Refer to the applicable warnings and cautions for this system before performing the following operation (refer to 24 - HEATING & AIR CONDITIONING/PLUMBING - WARNING) and (refer to 24 - HEATING & AIR CONDITIONING/PLUMBING - CAUTION). Failure to follow the warnings and cautions could result in possible personal injury or death.

CAUTION: Before removing the A/C condenser, note the location of each of the radiator/condenser air seals. These air seals are used to direct air through the A/C condenser and radiator. The air seals must be reinstalled in their proper locations in order for the A/C and engine cooling systems to perform as designed.





(refer to 24 - HEATING & AIR CONDITIONING/PLUMBING - STANDARD PROCEDURE - REFRIGERANT SYSTEM RECOVERY)
(refer to 13 - FRAME & BUMPERS/BUMPERS/FRONT FASCIA - REMOVAL)

NOTE: It is not necessary to remove the hood latch from the upper radiator support on gasoline engine equipped models for A/C condenser service.


(refer to 23 - BODY/EXTERIOR/SUPPORT-UPPER RADIATOR - REMOVAL)




NOTE: Illustration shown with front fascia removed for clarity.


NOTE: On gasoline engine equipped models, reach up through the opening in the bottom of the front fascia located in the right front corner of the vehicle to gain access to the A/C liquid line.






NOTE: Illustration shown with front fascia and diesel engine charge air cooler (CAC) (when equipped) removed for clarity.




(refer to 7 - COOLING/TRANSMISSION - STANDARD PROCEDURE - TRANSMISSION COOLER LINE QUICK CONNECT FITTING)
(refer to 7 - COOLING/ENGINE/CHARGE AIR COOLER - REMOVAL)