P0513-INVALID SKIM KEY

For a complete wiring diagram Refer to Section 8W


  • When Monitored:

    With the ignition on.

  • Set Condition:

    The ECM receives and invalid SKIM Key message from the SKREEM.


Possible Causes
 
INTERMITTENT DTC
 
UNPROGRAMMED IGNITION KEYS
 
SKREEM
 
ENGINE CONTROL MODULE (ECM)
 


Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. (Refer to 9 - ENGINE - DIAGNOSIS AND TESTING)



Diagnostic Test

1.CHECK FOR SKREEM COMMUNICATION AND DTCS




Are any SKREEM communication problems or DTCs present?

Yes
  • Refer to the symptom list for problems related to SKREEM Communication and DTCs before continuing.


No
  • Go To 2

2.CHECK FOR ACTIVE DTC





Is the status Active for this DTC?

Yes
  • Go to 3


No

3.REPROGRAM IGNITION KEYS AND RETEST






Is the status Active for this DTC?

Yes


No
  • Test complete.

4.REPLACE THE SKREEM AND RETEST







Is the status Active for this DTC?

Yes


No
  • Test complete.