RIGHT AUDIO OUTPUT 1 SHORT TO GROUND





For a complete wiring diagram Refer to Section 8W.


  • When Monitored:

    With the ignition on.

  • Set Condition:

    The Hands Free Module detects low voltage on the (X40) Audio MUX Right circuit.


Possible Causes
 
(X40) AUDIO MUX RIGHT CIRCUIT OPEN
 
(X40) AUDIO MUX RIGHT CIRCUIT SHORT TO GROUND
 
(X140) AUDIO RETURN CIRCUIT OPEN
 
(X40) AUDIO MUX RIGHT CIRCUIT SHORT TO (X140) AUDIO RETURN CIRCUIT
 
HANDS FREE MODULE
 




Diagnostic Test

1.CHECK FOR ACTIVE DTC






Did this DTC reset?

Yes
  • Go To 2


No
  • The condition that set this DTC is no longer present. Using the wiring diagram/schematic as a guide, inspect the wiring for chafed, pierced, pinched, and partially broken wires and the wiring harness connectors for broken, bent, pushed out, and corroded terminals.

2.(X40) AUDIO MUX RIGHT CIRCUIT OPEN








Is the resistance below 5.0 ohms?

Yes
  • Go To 3


No

3.(X40) AUDIO MUX RIGHT CIRCUIT SHORT TO GROUND





Is the resistance below 5.0 ohms?

Yes


No
  • Go To 4

4.(X140) AUDIO RETURN CIRCUIT OPEN





Is the resistance below 5.0 ohms?

Yes
  • Go To 5


No

5.(X40) AUDIO MUX RIGHT CIRCUIT SHORT TO (X140) AUDIO RETURN CIRCUIT





Is the resistance below 5.0 ohms?

Yes


No