VISTEON A/C COMPRESSOR
NOTE: The compressor clutch assembly can be serviced with the refrigerant system fully-charged.

(refer to 7 - COOLING/ACCESSORY DRIVE/BELTS-DRIVE - REMOVAL)
(refer to 24 - HEATING & AIR CONDITIONING/PLUMBING/COMPRESSOR-A/C - 3.7L ENGINE - REMOVAL)
NOTE: The clutch plate can be removed from the compressor shaft by hand or, if required, pressed off with an 8 x 1.25 mm bolt.
NOTE: Clutch plate shim(s) may remain inside the hub of the clutch plate. Be sure to remove all of the shims from inside the hub or from the end of the compressor shaft.


NOTE: The pulley and bearing assembly can be removed from the compressor by hand or, if required, with a two jaw puller.

