TRANSMISSION


GENERAL

Component
  		 Metric
  		 Inch
  
Output Shaft End Play
  		 0.22-0.55 mm
  		 0.009-0.021 in.
  
Input Shaft End Play
  		 0.46-0.89 mm
  		 0.018-0.035 in.
  
2C Clutch Pack Clearance
  		 0.455-1.335 mm
  		 0.018-0.053 in.
  
4C Clutch Pack Clearance
  		 0.770-1.390 mm
  		 0.030-0.055 in.
  
L/R Clutch Pack Clearance
  		 1.00-1.74 mm
  		 0.039-0.069 in.
  
OD Clutch Pack Clearance
  		 1.103-1.856 mm
  		 0.043-0.073 in.
  
UD Clutch Pack Clearance
  		 0.84-1.54 mm
  		 0.033-0.061 in.
  
Reverse Clutch Pack Clearance
  		 0.81-1.24 mm
  		 0.032-0.049 in.
  
Recommended fluid
  		 Mopar® ATF +4
  


GEAR RATIOS

1ST
  		 3.00:1
  
2ND
  		 1.67:1
  
2ND Prime
  		 1.50:1
  
3RD
  		 1.0:1
  
4TH
  		 0.75:1
  
5TH
  		 0.67:1
  
REVERSE
  		 3.00:1
  


TORQUE SPECIFICATIONS

DESCRIPTION

  

N·m

  

Ft. Lbs.

  

In. Lbs.

  
Fitting, cooler line at trans
  		 17.5
  		 -
  		 155
  
Bolt , torque converter housing to engine upper four
 		 41
  		 30
  		  
Bolt , torque converter housing to engine lower four
 		 54
 		 40
  		  
Bolts, transmission collar
 		 68
  		 50
  		  
Bolt, torque convertor to driveplate
  		 31
  		 23
  		 270
  
Bolt/nut, crossmember
  		 68
  		 50
  		 -
  
Bolt, driveplate to crankshaft
  		 75
  		 55
  		 -
  
Bolts, clevis bracket / rear support
  		 47
  		 35
  		  
Bolt , converter housing
  		 68
  		 50
  		  
Bolt, oil pan
  		 12
  		 -
  		 105
  
Screw, primary fluid filter
  		 4.5
  		 -
  		 40
  
Nuts , transfer case
  		 35
  		 26
  		  
Filter, Cooler Return
  		 9.5
  
 		 84
  
Bolt, oil pump
  		 28
  		 -
  		 250
  
Bolt, oil pump body to cover
  		 4.5
  		 -
  		 40
  
Screw, plate to oil pump body
  		 4.5
  		 -
  		 40
  
Bolt, valve body to case
  		 12
  		 -
  		 105
  
Plug, pressure test port
  		 5
  		 -
  		 45
  
Bolt, reaction shaft support
  		 12
  		 -
  		 105
  
Screw, valve body to transfer plate
  		 5.5
  		 -
  		 50
  
Screw, solenoid module to transfer plate
  		 6
  		 -
  		 50
  
Screw, accumulator cover
  		 7
  		 -
  		 60
  
Screw, detent spring
  		 4.5
  		 -
  		 40
  
Bolt, input speed sensor
  		 12
  		 -
  		 105
  
Bolt, output speed sensor
  		 12
  		 -
  		 105
  
Bolt, line pressure sensor
  		 12
  		 -
  		 105
  
Bolt, extension housing
  		 54
  		 40
  		 -
  
Screw, manual valve cam retaining
  		 4.5
  		 -
  		 40
  
Screw, manual selector shaft retaining
  		 28
  		 -
  		 250
  
Cross-bolt, manual selector shaft
  		 16
  		 -
  		 140