P0604-INTERNAL CONTROL MODULE RAM

For a complete wiring diagram Refer to Section 8W.

Theory of Operation


After the controller is reset (ignition turned to the RUN position), the microprocessor checks the integrity of each RAM location by writing to it and reading back from it. The read value should be same as value written.


  • When Monitored:

    One time after the controller is reset (ignition turned to the RUN position).

  • Set Condition:

    Whenever the Transmission Control Module (TCM) detects an internal controller problem.


Possible Causes
 
POWER OR GROUND CIRCUIT
 
TRANSMISSION CONTROL MODULE
 


Always perform the 45RFE/545RFE Pre-Diagnostic Troubleshooting procedure before proceeding. (Refer to 21 - TRANSMISSION/TRANSAXLE/AUTOMATIC - 45RFE/545RFE - STANDARD PROCEDURE)



Diagnostic Test

1.CHECK WIRING AND CONNECTORS FOR INTERMITTENT OPERATION





Were there any problems found?

Yes


No