REMOVAL



NOTE: Before servicing the timing belt, the engine must be rotate to 90 degrees ATDC and alignment pin VM.1089 installed (Refer to 9 - ENGINE/VALVE TIMING - STANDARD PROCEDURE).



(Refer to 9 - ENGINE COVER - REMOVAL)
(Refer to 7 - COOLING/ENGINE/FAN DRIVE VISCOUS CLUTCH - REMOVAL)
(Refer to 7 - COOLING/ACCESSORY DRIVE/DRIVE BELTS - REMOVAL)
(Refer to 7 - COOLING/ENGINE/RADIATOR FAN - REMOVAL)
(Refer to 9 - ENGINE/ENGINE BLOCK/VIBRATION DAMPER - REMOVAL)

(Refer to 9 - ENGINE/VALVE TIMING/TIMING BELT / CHAIN COVER(S) - REMOVAL)