LEFT AUDIO INPUT SHORT TO GROUND





For a complete wiring diagram Refer to Section 8W.


  • When Monitored:

    With the ignition on.

  • Set Condition:

    The Hands Free Module detects low voltage on the (X41) Audio MUX Left circuit.


Possible Causes
 
(X41) AUDIO MUX LEFT CIRCUIT OPEN
 
(X41) AUDIO MUX LEFT CIRCUIT SHORT TO GROUND
 
(X140) AUDIO RETURN CIRCUIT OPEN
 
(X41) AUDIO MUX LEFT CIRCUIT SHORT TO (X140) AUDIO RETURN CIRCUIT
 
HANDS FREE MODULE
 




Diagnostic Test

1.CHECK FOR ACTIVE DTC






Did this DTC reset?

Yes
  • Go To 2


No
  • The condition that set this DTC is no longer present. Using the wiring diagram/schematic as a guide, inspect the wiring for chafed, pierced, pinched, and partially broken wires and the wiring harness connectors for broken, bent, pushed out, and corroded terminals.

2.(X41) AUDIO MUX LEFT CIRCUIT OPEN








Is the resistance below 5.0 ohms?

Yes
  • Go To 3


No

3.(X41) AUDIO MUX LEFT CIRCUIT SHORT TO GROUND





Is the resistance below 5.0 ohms?

Yes


No
  • Go To 4

4.(X140) AUDIO RETURN CIRCUIT OPEN





Is the resistance below 5.0 ohms?

Yes
  • Go To 5


No

5.(X41) AUDIO MUX LEFT CIRCUIT SHORT TO (X140) AUDIO RETURN CIRCUIT





Is the resistance below 5.0 ohms?

Yes


No