ITM–SIREN INTERNAL BATTERY (EXPORT ONLY)

For a complete wiring diagram Refer to Section 8W

When Monitored:
Continuously with engine speed over 600 rpm.
Set Condition:
The Intrusion Transceiver Module (ITM) will set this DTC if the internal battery within the siren does not charge as expected.

Possible Causes

SIREN

1.VERIFY THAT THE DTC IS ACTIVE

Did this DTC reset?

Yes

Replace the Siren in accordance with the Service Information.
Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE).

The condition that caused this symptom is currently not present. Test complete.
Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE).