ORC OUTPUT DRIVER 1

For a complete wiring diagram Refer to Section 8W.


  • When Monitored:

    With the ignition on.

  • Set Condition:

    The Occupant Restraint Controller (ORC) on board diagnostics continuously performs internal circuit tests. The ORC will set this DTC if it identifies an out of range internal circuit.


Possible Causes
 
ORC
 




Diagnostic Test

1.REPLACE THE ORC

NOTE: Ensure that the battery is fully charged.





Repair
  • WARNING: If the Occupant Restraint Controller (ORC) is dropped at any time, it must be replaced. Failure to take proper precautions could result in accidental airbag deployment and personal injury or death.

    WARNING: To avoid personal injury or death, turn the ignition off, disconnect the battery and wait two minutes before proceeding.

  • Replace the ORC in accordance with the Service Information.
  • Perform the *AIRBAG SYSTEM VERIFICATION TEST - VER 1.