CLUSTER WAKE UP OUTPUT LOW





For a complete wiring diagram Refer to Section 8W.


  • When Monitored:

    With the ignition in the OFF position.

  • Set Condition:

    When the BCM receives an input from the driver door switch or an input from exterior lamp control switch. Symptoms will include: No fast chime with key in ignition or Park Lamps on and driver door open. No VF odometer display when door open. No cluster, high beam indicator, front or rear fog lamp indicator illumination.


Possible Causes
 
(A908) FUSED B(+) CIRCUIT OPEN
 
(G150) INSTRUMENT CLUSTER WAKE UP SIGNAL CIRCUIT OPEN
 
INTERMITTENT CONDITION
 
(G150) INSTRUMENT CLUSTER WAKE UP SIGNAL CIRCUIT SHORT TO GROUND
 
BODY CONTROL MODULE
 
INSTRUMENT CLUSTER
 




Diagnostic Test

1.







Is the voltage above 10.5 volts?

Yes
  • Go To2


No

2.








Is the resistance above 5.0 ohms?

Yes


No
  • Go To3

3.








Is the resistance below 5.0 ohms?

Yes


No
  • Go To4

4.












Did the DVOM indicate a brief (2 second) continuity to ground?

Yes
  • Go To5


No

5.






Did this DTC reset?

Yes


No