ASSEMBLY
BEARINGS AND SEALS








INPUT AND PLANETARY GEAR



SHIFT FORKS AND MAINSHAFT














FRONT OUTPUT SHAFT AND DRIVE CHAIN





OIL PUMP AND REAR CASE

CAUTION: Do not remove the bolts holding the oil pump cover to the rear case half. The oil pump cover is aligned to the rear output shaft inner bearing race and will become mis-aligned if the bolts are loosened. If the transfer case failure has generated any debris which may have become trapped in the oil pump. the rear case and oil pump assembly MUST be replaced.

CAUTION: Verify that shift rail, and case alignment dowels are seated before installing any bolts. Case could be cracked if shaft rail or dowels are misaligned.

REAR EXTENSION

COMPANION FLANGE AND RANGE LEVER


