B166C-LEFT TRAILER TOW LAMP CONTROL CIRCUIT HIGH

For a complete wiring diagram Refer to Section 8W.


  • When Monitored:

    With the ignition on.

  • Set Condition:

    The Totally Integrated Power Module (TIPM) detects an HIGH condition.


Possible Causes
 
(L673) LEFT TRAILER TOW LAMP CONTROL CIRCUIT OPEN
 
(L673) LEFT TRAILER TOW LAMP CONTROL CIRCUIT SHORTED TO VOLTAGE
 
TOTALLY INTEGRATED POWER MODULE
 




Diagnostic Test

1.TEST FOR INTERMITTENT CONDITION






Does the scan tool display active: B166C-LEFT TRAILER TOW LAMP CONTROL CIRCUIT HIGH?

Yes
  • Go To 2


No
  • The condition that caused this symptom is currently not present. Check for an intermittent condition by inspecting the related wiring harness for chafed, pierced, pinched, and partially broken wires. Also, inspect the related connectors for broken, bent, pushed out, spread, corroded, or contaminated terminals. Repair as necessary.
  • Perform the BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)

2.(L673) LEFT TRAILER TOW LAMP CONTROL CIRCUIT OPEN






Does the ohm meter read open circuit?

Yes


No
  • Go To 3

3.(L673) LEFT TRAILER TOW LAMP CONTROL CIRCUIT SHORTED TO VOLTAGE




Is there any voltage present?

Yes


No