INSTALLATION
Also be sure transmission dowel pins are seated in engine block and protrude far enough to hold transmission in alignment.
CAUTION: Be sure the converter housing is fully seated on the engine block dowels before tightening any bolts.
(Refer to 21 - TRANSMISSION/TRANSFER CASE - INSTALLATION)
(Refer to 8 - ELECTRICAL/STARTING/STARTER MOTOR - INSTALLATION)
(Refer to 3 - DIFFERENTIAL & DRIVELINE/PROPELLER SHAFT/PROPELLER SHAFT - INSTALLATION)
(Refer to 13 - FRAME & BUMPERS/FRAME/TRANSFER CASE SKID PLATE - INSTALLATION)