P0630-VIN NOT PROGRAMMED IN PCM

For a complete wiring diagram Refer to Section 8W.


  • When Monitored:

    At initialization.

  • Set Condition:

    The VIN has not been programmed into the PCM. One Trip Fault. Three good trips to turn off the MIL.


Possible Causes
  
PROGRAMMING VIN INTO PCM
  
PCM
  

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. (Refer to 9 - ENGINE - DIAGNOSIS AND TESTING).



Diagnostic Test

1.PROGRAMMING VIN INTO THE PCM




NOTE: If the engine will not start, crank the engine over for 15 seconds. Crank at least 2 times with the ignition switch returning to the off position each time.





Does the DTC reset?

Yes


No