OPERATION

The front fog lamp indicator gives an indication to the vehicle operator whenever the front fog lamps are illuminated. This indicator is controlled by a transistor on the instrument cluster circuit board based upon cluster programming and electronic messages received by the cluster from the Front Control Module (FCM) over the Controller Area Network (CAN) data bus.

The front fog lamp indicator Light Emitting Diode (LED) is completely controlled by the instrument cluster logic circuit, and that logic will allow this indicator to operate whenever the instrument cluster receives a battery current input on the fused B(+) circuit. Therefore, the LED can be illuminated regardless of the ignition switch position. The LED only illuminates when it is provided a path to ground by the instrument cluster transistor. The instrument cluster will turn ON the front fog lamp indicator for the following reasons:

  • Front Fog Indicator Lamp-On Message - Each time the cluster receives an electronic front fog indicator lamp-ON message from the FCM indicating the front fog lamps are turned ON, the front fog lamp indicator will be illuminated. The indicator remains illuminated until the cluster receives a lamp-OFF message from the FCM, or until the exterior lamp load shedding (battery saver) timed interval expires, whichever occurs first.
  • Actuator Test - Each time the cluster is put through the actuator test, the front fog lamp indicator will be turned ON, then OFF again during the bulb check portion of the test to confirm the functionality of the LED and the cluster control circuitry.

The FCM continually monitors electronic exterior lighting switch status messages from the Steering Control Module (SCM) to determine the appropriate outputs to the front fog lamp relay. The FCM activates or deactivates the front fog lamp relay then sends the proper lamp-ON or lamp-OFF message to the ElectroMechanical Instrument Cluster (EMIC).

For proper diagnosis of the front fog lamp system, the FCM, the SCM, the EMIC, the CAN data bus or the electronic communication related to front fog lamp indicator operation a diagnostic scan tool is required. Refer to the appropriate diagnostic information.