INSTALLATION

NOTE: The following procedure applies to either of the two rear parking brake cables.













(Refer to 5 - BRAKES/PARKING BRAKE/SHOES - INSTALLATION)


(Refer to 22 - TIRES/WHEELS - INSTALLATION)







CAUTION: A NEW parking brake cable equalizer (2) must be installed when servicing the parking brake cables or lever. The equalizer has an integrated bent nail tensioner that needs to be stretched upon installation placing the correct tension on the cables.






NOTE: Actuating the parking brake lever to its fully applied position one time after tightening the adjustment nut will yield (stretch) the bent nail portion of the equalizer approximately 6 mm (1/4 inch). This process will correctly set the parking brake cable tension.














(Refer to 23 - BODY/INTERIOR/CENTER CONSOLE - INSTALLATION)