INSTALLATION

CAUTION: This procedure is designed to be used only if a seal boot is damaged during related service procedures. It is not to be used as a repair procedure for a cut seal boot on a vehicle that has been driven and exposed to road and weather conditions.







CAUTION: Prior to installing the sealing boot using Remover/Installer, Special Tool 6289-4, make sure there are no burrs on the inside of the tool. Remove any burrs and lubricate with a small amount of Mopar® Multi-Mileage Lube or equivalent.








(Refer to 2 - SUSPENSION/FRONT/LOWER CONTROL ARM - INSTALLATION)