B16F8–FRONT LEFT FOG LAMP CONTROL CIRCUIT LOW

For a complete wiring diagram Refer to Section 8W.


  • When Monitored:

    With the Front Fog Lamps activated.

  • Set Condition:

    When the Totally Integrated Power Module (TIPM) detects a LOW condition.


Possible Causes
 
(L89) FRONT LEFT FOG LAMP CONTROL CIRCUIT SHORT TO GROUND
 
FRONT LEFT FOG LAMP BULB
 
TOTALLY INTEGRATED POWER MODULE
 




Diagnostic Test

1.INTERMITTENT CONDITION






Does the scan tool display active: B16F8–FRONT LEFT FOG LAMP CONTROL CIRCUIT LOW?

Yes
  • Go To 2


No
  • The condition that caused this symptom is currently not present. Check for an intermittent condition by inspecting the related wiring harness for chafed, pierced, pinched, and partially broken wires. Also, inspect the related connectors for broken, bent, pushed out, spread, corroded, or contaminated terminals. Repair as necessary.
  • Perform the BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)

2.FRONT LEFT FOG LAMP BULB






Does the DTC reset?

Yes
  • Go To 3


No

3.(L89) FRONT LEFT FOG LAMP CONTROL CIRCUIT SHORT TO GROUND





Is the resistance above 10k ohms?

Yes
  • Replace the Totally Integrated Power Module (TIPM) in accordance with the Service Information.


No